| REXROTH 3WE6B7X/HG24N9K4/V Valves | Recommended tightening torque for set screw:3.9 Nm; C0:11.5 kN; A2:40.2 mm; A1:13 mm; L:80 mm; C:15.3 kN; J:117 mm; d:30.16 mm; A:31 mm; T max.:100 °C; |
| REXROTH 4WE6EB7X/OFHG24N9K4/B10 Valves | H1:23.2 mm; N1:26 mm; Designation of bearing:US211-35G2T04; S:11.8 mm; Designation of open end cover:SCOU211-35; C:43.55 kN; Weight:3.6 kg; Recommended tightening torque for set screw:8 Nm; H2:128 mm; J:170.5 mm; |
| REXROTH 4WE6F7X/HG24N9K4 Valves | T min.:-20 °C; S:10.9 mm; d:50 mm; Designation of housing:PG210-; Designation of bearing:US210G2; s1:21.75 mm; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; C:35.1 kN; H1:21 mm; |
| REXROTH 4WE6B6X/OFEG24N9K4/V Valves | Dynamic load, C:260 kN; Minimum Buy Quantity:N/A; Radial clearance class:C3; Characteristic cage frequency, FTF:0.43 Hz; Mass (without HJ ring):5.6 kg; Nlim (oil):3,700 rpm; Characteristic inner ring frequency, BPFI:9.15 Hz; Da max:204 mm; B:40 mm; Fatigue limit load, Cu:33.4 kN; |
| REXROTH S10P30-1X Valves | G:M6x1; C:29.6 kN; Designation of open end cover:SCOU208-24; H:49.2 mm; s1:24.6 mm; J:84 mm; L:116 mm; Designation of bearing:UC208-24G2T04; S:19 mm; Dz:88 mm; |
| REXROTH DBW30B2-5X/100-6EG24N9K4/V Valves | S:17 mm; Weight:0.22 kg; C0:6.65 kN; T max.:100 °C; d:19.05 mm; r:0.6; B2:13.5 mm; C:16 mm; SW:3.18 mm; d1:32.4 mm; |
| REXROTH DBE10-3X/315YG24N9K4 Valves | End Cap Groove:Yes; Bearing Outer Ring Material:Steel; Ball Bearing Housing Series:216 Series; Self Aligning:Self Centering; Flinger Material:Steel; Grease Type:Unirex N2; Seal Type:Single Lip; Housing Material:Cast Iron; Flinger Type:Rubberized; Bearing Insert Material:Steel; |
| REXROTH ZDR6DP2-4X/25Y Valves | J:64 mm; B:22 mm; T min.:-20 °C; C:9.55 kN; N:12mm; Weight:0.4 kg; L:86 mm; A2:31 mm; A:25.5 mm; G:M6x1; |
| REXROTH 4WE6L7X/HG24N9K4 Valves | J:68 mm; s1:16 mm; B:32 mm; A:48 mm; Weight:1.42 kg; T max.:200 °C; Z:22.5 mm; Designation of housing:PG207N-; d:35 mm; S:8.5 mm; |
| REXROTH 3WE6A7X/HG24N9K4/B10 Valves | L3:95 mm; H1:130 mm; L2:19 mm; P:300 mm; T max.:100 °C; N2:64 mm; A2:38 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; d:50.8 mm; |