| 24118/24262D Timken Tapered Roller Bearing Assembly | C - Cup Width:0.5312 in; Da - Cup Frontface Backing Diameter:3.39 in; Cup Part Number:LM806610; D:3.5000 in; Series:LM806600; Y - ISO Factor3:1.1; r - Cup Backface To Clear Radius1:0.08 in; Design Units:Imperial; e - ISO Factor2:0.55; Cg - Geometry Factor:0.09; Db - Cup Backface Backing Diameter:3.15 in; |
| 387AS/384ED Timken Tapered Roller Bearing Assembly | d:90 mm; F:113,5 mm; r1 min.:3 mm; C:64 mm; Basic static load rating (C0):536 kN; Bearing number:NUP2318-E-TVP3; Weight:8,1 Kg; D:190 mm; Width (mm):64; Outer Diameter (mm):190; Size (mm):90x190x64; r3 min.:3 mm; r4 min.:3 mm; Bore Diameter (mm):90; r2 min.:3 mm; B:64 mm; Basic dynamic load rating (C):486 kN; |
| 66187/66462D Timken Tapered Roller Bearing Assembly | G2 - Heat Generation Factor (Rib-Roller End):13.3; r - Cup Backface To Clear Radius2:1.27 mm; C - Cup Width:15.875 mm; B - Cone Width:19.202 mm; da - Cone Frontface Backing Diameter:36.58 mm; Ab - Cage-Cone Frontface Clearance:2.3 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; Cone Part Number:14118; D:77.788 mm; d:30 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; K - Factor7:1.53; |
| 55206/55433D Timken Tapered Roller Bearing Assembly | H:80,000 mm; Bore Diameter (mm):160,000; Bearing number:24032EAK30W33; Outer Diameter (mm):240,000; D:240,000 mm; Size (mm):160x240x80; Width (mm):80,000; d:160,000 mm; |
| 15125/15251D Timken Tapered Roller Bearing Assembly | H:9 mm; F:208 mm; N:13,7 mm; 1:Wheel Bearing; G:165,1 mm; J:10,2 mm; K:99,3 mm; P:126 mm; I:55,89 mm; M:99,3 mm; E:121,05 mm; Bearing number:IJ223010; |
| 13685/13621D Timken Tapered Roller Bearing Assembly | Ew:-; D:400 mm; d:190 mm; Bore Diameter (mm):190; ra(max):4; Cu:146; r1 min.:5 mm; dd(min):-; (Grease) Lubrication Speed:1300 r/min; Da(max):380; r min.:5 mm; rb(max):4; d1:-; Width (mm):78; Basic static load rating (C0):1260 kN; B1:-; r1(min):5; r(min):5; (Refer.)Mass(kg):49.9; B:78 mm; |
| NA44156/44363D Timken Tapered Roller Bearing Assembly | Dimension E:5.30 in; Bearing Number:22216; Dimension G:6.375 in; Dimension J (Bolt Size):0.625 in; Dimension BC:7.50 in; Y1 - Geometry Factor:3.14; Dimension H:0.81 in; Pre Install Clearance Min:0.0037 in; Dimension L:3.33 in; Dimension N:1.25 in; e - Geometry Factor:0.22; Dimension C:4.190 in; Grease Lubrication - B/C/O Seal:1150 rpm; Dimension SV:3.29 in; Float:0.083 in; Grease Lubrication - M/N Seal:1500 rpm; |
| 3490/3423D Timken Tapered Roller Bearing Assembly | Snap Ring Thickness (I):2.4000; Weight (g):1,891.48; Dynamic Load Rating (Cr):52,446; Bearing Inner Race Width - Extended Side (m):39.7000; Snap Ring Dia. (G):116.4000; Bore Diameter (mm):57,15; Snap Rinf Location (Sd):3.2000; Bearing number:ER212-36; Relubrication Hole Location (oh):7.5000; Inner Width (Bi):65.1000; Bearing Collar Set Screw (L) - 3/8-24UNF:3/824UNF; Bore Dia (d):57.1500; Shaft Size (ds) - 2-1/4:21/4; |