| 545645Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 - Flange Outer Diameter:85.000 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:113000 N; e - ISO Factor8:0.38; r - Cup Backface To Clear Radius2:1.5 mm; Series:33109; Ab - Cage-Cone Frontface Clearance:2.3 mm; da - Cone Frontface Backing Diameter:52.10 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; K - Factor7:1.52; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:19200 N; C1 - Cup Flange Width:4.500 mm; |
| 829736 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db - Cone Backface Backing Diameter:5.67 in; B - Cone Width:1.8125 in; D1 - Flange Outer Diameter:8.0272 in; Series:67300; Cup Part Number:67322-B; K - Factor7:1.7; a - Effective Center Location3:-0.25 in; C - Cup Width:1.5000 in; Design Units:Imperial; D:7.7500 in; G2 - Heat Generation Factor (Rib-Roller End):70.1; C0 - Static Radial Rating:141000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:82600 lbf; |
| NSK 550TFD7602 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A3 - H14:3.2 mm; A5:20 mm; Hexagonal key size for grub screw N:4 mm; d:30 mm; Basic static load rating C0:11.2 kN; Basic static load rating - C0:11.2 kN; Fatigue load limit Pu:0.475 kN; Thread - G2:M8x1; T:50.1 mm; Size (mm):30x33x15.3; Mass bearing unit:0.56 kg; A:33 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Outer Diameter (mm):33; Width (mm):15,3; Recommended diameter for attachment bolts, mm G:10 mm; |
| 579703 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Lubrication - M/N Seal:2000 rpm; Dimension L Exp:3.4 in; Shaft Size Type:Imperial; Housing Style:Four-Bolt Square Fla; Dimension SV:3.14 in; Grease Lubrication - M/N Seal:2000 rpm; Eng Internal Radial Clearance - Min:0.0030; Dimension J (Bolt Size):0.625 in; Y1 - Geometry Factor:2.86; Dimension RV:0.18 in; Weight:14 lb; Dimension BC:6.36 in; Full Timken Part Number:QVFX12V203SB; Oil Lubrication - B/C/O Seal:1650 rpm; |
| SKF 351164C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Outer Diameter (mm):180; Bore Diameter (mm):120; d:120 mm; T:38 mm; B:38 mm; C:29 mm; D:180 mm; R:2,5 mm; Basic dynamic load rating (C):245 kN; r:2 mm; Bearing number:32024; Width (mm):38; Size (mm):120x180x38; Weight:3,25 Kg; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ID Chamfer Length (Ci):0.500; Bore Diameter (mm):28; Material:Wrapped bronze with; Bearing Type:straight; Housing Bore Dia. (Dh) - 32 +0.025 / -0:32 +0.025 / 0; Shaft Dia., Nominal (d):28.0000; Shaft Size (ds) - 28 -0.065 / -0.086:28 0.065 / 0.086; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):35; Wall Thickness (S3):2.000; OD Chamfer Length (Co):1.200; Bearing Length, Nominal (B):30.000; |
| 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Size (mm):25x47x12; C:12,000 mm; Outer Diameter (mm):47,000; Width (mm):12,000; B:12,000 mm; Bearing number:6005; D:47,000 mm; d:25,000 mm; Bore Diameter (mm):25,000; |
| 829764 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:220 mm; Weight:40 Kg; Bore Diameter (mm):220; Outer Diameter (mm):400; (Grease) Lubrication Speed:850 r/min; D:400 mm; Width (mm):72; Basic static load rating (C0):1400 kN; Basic dynamic load rating (C):990 kN; C:54 mm; Bearing number:30244 A; Size (mm):220x400x72; a:74 mm; B:65 mm; T:72 mm; |